Energies, Vol. 18, Pages 5344: Enhancing the Adsorption Performance of HKUST-1 by Adding NH4F During Room-Temperature Synthesis for Desulfurization of Fuel Oil

Energies, Vol. 18, Pages 5344: Enhancing the Adsorption Performance of HKUST-1 by Adding NH4F During Room-Temperature Synthesis for Desulfurization of Fuel Oil

Energies doi: 10.3390/en18205344

Authors:
Jiawei Fu
Xinchun Liu
Yuqing Kong
Ruyu Zhao
Yinyong Sun
Ahmed S. Abou-Elyazed

Adsorption desulfurization of fuel oil is regarded as one of the most promising technologies for obtaining clean fuel because it can remove refractory sulfur compounds at ambient temperature and pressure. Studies indicate that HKUST-1, as an important type of metal–organic framework (MOF), is a potential candidate for adsorption desulfurization of fuel oil. In this work, we report that defective HKUST-1 can be rapidly synthesized at room temperature with the aid of NH4F and exhibit superior adsorption desulfurization performance compared to conventional HKUST-1 by the solvothermal method. Moreover, the influence of adsorption parameters on the desulfurization performance of HKUST-1 prepared with the aid of NH4F was investigated. We used 50 mg of HKUST-1-5 synthesized with 5 wt% added NH4F to adsorb 5 g of model oil with a sulfur concentration of 1000 ppm at 25 °C for 1 h, and the adsorption capacity of the adsorbent reached 23.8 mgS/g, 46.8 mgS/g and 36.8 mgS/g for benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT), respectively, which are higher values than those of conventional HKUST-1. Such performance can be mainly attributed to its relatively small particle size and the presence of more unsaturated Cu sites. The results of regeneration experiments show that HKUST-1-5 still maintains excellent adsorption performance after four cycles. These findings highlight the great potential of this material as an efficient adsorbent for adsorption desulfurization of fuel oil.