Energies, Vol. 18, Pages 5881: Integrated Soil Temperature Measurement at Multiple Depths for Building Energy Performance Assessment Under Climate Change Conditions

Energies, Vol. 18, Pages 5881: Integrated Soil Temperature Measurement at Multiple Depths for Building Energy Performance Assessment Under Climate Change Conditions

Energies doi: 10.3390/en18225881

Authors:
Ewa Daniszewska
Aldona Skotnicka-Siepsiak
Anna Górska-Pawliczuk
Piotr E. Srokosz

This article presents an original, multi-depth soil-temperature monitoring system based on TMP117 digital sensors designed for deployment at several depths. The objective was to evaluate the system’s accuracy and applicability for building-energy performance assessment under contemporary climate conditions. Urban measurements at depths between 1.0 and 2.0 m were compared with ground temperatures derived using PN-EN 16798-5-1:2017-07 with Typical Meteorological Year (TMY) inputs and with observations from the Polish Institute of Meteorology and Water Management (IMWM). Standard inputs underestimated soil temperature on average by 1.1–2.3 °C (TMY) and 2.0–2.8 °C (IMWM), with the bias increasing with depth. For a ground-to-air heat-exchanger (GAHE) assessment, energy benefits estimated from standard inputs were lower in measurements by approximately 30–60% for pre-cooling and 70–86% for pre-heating. Measurements also revealed location-dependent differences between boreholes attributable to underground infrastructure. These findings indicate that non-local or outdated climate datasets can materially overestimate GAHE potential and confirm the need for local, multi-depth ground measurements and periodic updates of standard climate inputs to reflect urbanized conditions and climate change. The presented system constitutes a practical, scalable tool for engineers and designers of HVAC systems relying on ground heat exchange.